Features
WorkCentre 6015 Color Multifunction Printer 33
User Guide
Maintenance
Use this menu to find firmware information, make adjustments, and reset defaults.
Displays the latest firmware version.
Adjusts the paper type settings to match the paper loaded in the paper tray.
Specifies the bias transfer roller (BTR) voltage for printing on the selected paper type.
Specifies the optimum Fusing Unit voltage for printing on the selected paper type.
Adjusts the color registration automatically. The default setting is On.
Corrects the color registration.
For details, see Color Registration on page 157.
Rotates the developer motors and stirs the toner cartridges to clear old toner from
the developers.
Rotates the developer and stirs the toner in the selected color developer.
Specifies when to execute a routine to refresh the BTR to prevent curling and improve
paper separation.
Initializes the settings stored in the non-volatile memory (NVM) except for the network
settings. The NVM stores the printer settings even after the power is turned off. After
executing this function and restarting the printer, all the menu settings are reset to their
default values.
Note: You cannot select this setting during printing.
Adjusts the altitude of the printer to obtain optimal printing results.
Secure Settings
Use this menu for controlling access to printer features.
When enabled, access to the Admin Menu requires a password. For details, see Changing
the Panel Lock Password on page 143.
Specifies if a function is unlocked and available to everyone, locked from everyone, or
password locked, requiring a password for access:
Copy
Fax
Available on WorkCentre 6015N/NI Color Multifunction Printer only.
Scan
Print from USB
Note: Panel Lock must be enabled before setting the service locks.
Turns Secure Receive Set On or Off.
To Next Page
Loading...
Need help?
General
