Xerox WorkCentre 6015 User Manual

Installation and Setup
52 WorkCentre 6015 Color Multifunction Printer
User Guide
Configuring Network Settings
This section includes:
 About TCP/IP and IP Addresses ................................................................................................................................. 52
 Assigning the IP Address of the Printer ................................................................................................................... 53
 Setting Up the Fax Header ........................................................................................................................................... 56
 Enabling the Printer for Scanning .............................................................................................................................. 57
Note: Available on WorkCentre 6015N/NI Color Multifunction Printer only.
About TCP/IP and IP Addresses
Computers and printers primarily use TCP/IP protocols to communicate over an Ethernet network.
Generally, Macintosh computers use either TCP/IP or the Bonjour protocol to communicate with a
network printer. For Macintosh OS X systems, TCP/IP is preferred. Unlike TCP/IP, however, Bonjour does
not require printers or computers to have IP addresses.
With TCP/IP protocols, each printer and computer must have a unique IP address. Many networks and
cable and DSL routers have a Dynamic Host Configuration Protocol (DHCP) server. A DHCP server
automatically assigns an IP address to every computer and printer on the network that is configured to
use DHCP.
If you use a Cable or DSL router, see the documentation for your router for information on IP addressing.

Xerox WorkCentre 6015 Specifications

General

Brand	Xerox
Model	WorkCentre 6015
Category	All in One Printer
Language	English