Page 104 FT-
991
The Standard Memory of the
allows storage and recall of up to 99 memories, each storing frequency, mode,
and a wide variety of status information, detailed previously. Memories may be grouped into as many as six Memory
Groups. Additionally there are nine pairs of band-limit
(
PMS
)
memories along with ve QMB
(
Quick Memory Bank
)
memories.
1. Set VFO-A up with the frequency, mode, and status,
the way you want to have it stored.
2. Press the
A
button momentarily; the current
channel number will appear in the display and the
“
” notation will appear.
A
M ButtonMULTI Knob
EJ
EJ
%9 7
3. Rotate the
knob to select the memory chan-
nel that you wish to store the data on.
4. Press and hold in the
A
button for one second to
store the frequency and other data into the selected
memory channel. A double beep will sound to con-
rm that the operation is completed.
1. Press the
button, if necessary, to enter the
“Memory mode”.
2. Press the
F
button, then touch
[
]
on
the LCD. A memory channel number and the “
”
notation will appear in the display.
F
(
M-LIST
)
Button
V/M ButtonMULTI Knob
3. Touch
[
]
on the LCD, and then rotate the
knob to select the desired memory channel.
To work within a particular Memory Group, press the
F
button, then touch
[
]
on the LCD.
Rotate the
knob to select the desired Memory
Group, then touch
[
]
on the LCD
(
the “
”
notation will appear instead of the “
”
)
; Now the
memory channel may be chosen from within the select-
ed Memory Group.
To Next Page
Loading...
Need help?
General
