Page 119FT-
991
The GM (group monitor) function monitors the set frequency to nd if there are any stations operating with the GM
function within communication range.
The
can then display the position and distance and other information for each member call sign on the screen.
Besides identifying GM stations that are within the sphere of communications, the GM function is also a convenient
method to instantly note the relative positions of all the members.
DG-IDInformation
Inrange(Blue)
Direction
Distance
Outofrange(Gray)
1. Press the [
] button, then touch [
].
The GM function does not work in the analog FM mode.
2. Set the desired operating frequency.
3.
Press the
button, then touch
[
]
on the LCD.
An explanation of the two methods of starting the GM operation is given on the following pages.
Refer to the separate Operating Manual GM Edition for additional details on using the GM Functions (download the
manual from our YAESU website).
Up to 24 stations operating with the GM function
within the sphere of communications will be listed
on the TFT display.
Stations within the sphere of communications are
displayed in blue.
Stations outside the sphere of communications
are displayed in grey.
:64:)&+&
*, 3,
4. Touch
[
]
on the LCD. The GM function will
be turned o and the display will return to the previ-
ous screen.
The WIRES-X is a system that connects to other users via the Internet. This function enables users to communicate with
other users regardless of the distance.
For details, refer to the separate WIRES-X Instruction Manual which is available on the Yaesu website.
To Next Page
Loading...
Need help?
General
