Page 35FT-
991
(
)
(
)
The recently-released 60-meter band is covered, in the
, by xed memory channels. These channels are set to
USB or CW, and they appear between the “last” PMS channel
(
“
P9U
”
)
and the rst “regular” memory channel
(
Channel
1
)
:
1. Press the
button once to enter the “Memory”
mode; the “
” icon will appear in the display.
2. Touch
[
]
on the screen displayed by pressing
the
F
button. The “
” notation and a
memory channel number will appear on the display
to signify that rotation of the
knob will allow
selection of the memory channel.
3. Memory channels
(
“
5-01
” through “
5-10
”
)
are
pre-programmed, at the factory, with the permitted
frequencies in the 5 MHz band, and the USB or CW
mode is automatically selected on these channels.
4. To exit from 60-meter operation and return to the
VFO mode, just press the
button.
The frequencies and operating mode for 5 MHz band
operation are xed, and may not be changed.
CLAR/VFO-B Knob
V/M Button
Main Tuning Dial Knob
5-01 5.332000 MHz
(
SSB
)
5.260000 MHz
(
SSB
)
5-02 5.348000 MHz
(
SSB
)
5.280000 MHz
(
SSB
)
5-03 5.358500 MHz
(
SSB
)
5.290000 MHz
(
SSB
)
5-04 5.373000 MHz
(
SSB
)
5.368000 MHz
(
SSB
)
5-05 5.405000 MHz
(
SSB
)
5.373000 MHz
(
SSB
)
5-06 5.332000 MHz
(
CW
)
5.400000 MHz
(
SSB
)
5-07 5.348000 MHz
(
CW
)
5.405000 MHz
(
SSB
)
5-08 5.358500 MHz
(
CW
)
-
5-09 5.373000 MHz
(
CW
)
-
5-10 5.405000 MHz
(
CW
)
-
To Next Page
Loading...
Need help?
General
