Page 11F
T-991
When turning on the power for the rst time after purchase, or after resetting the transceiver, enter your own call sign.
The call sign will be displayed on the start screen when turning on the power and will be used to identify the station
when sending messages during digital communication.
1. Press and hold the
button.
2. Touch
[
]
on the LCD.
MENU
(
SETUP
)
button
LCD
The time duration of the initial call sign start up
screen display may be changed from the Menu item
“
005 MY CALL INDICATION
”.
3. Touch a character key. The touched character will be
displayed at the top of the screen. Enter each charac-
ter of your call sign.
Up to 10 characters
(
letters, numbers, and sym-
bols
)
can be entered.
4. Touch
[
]
on the LCD. The call sign setting is
completed and the display will switch to the frequen-
cy display screen.
To Next Page
Loading...
Need help?
General
