Page 124 FT-
991
The Menu system of the
provides extensive customization capability; the transceiver may be setup to comple-
ment personal operating preferences. Menu items are grouped by general utilization categories, and are numbered from
“
001 AGC FAST DELAY
” to “
153 WIRES DG-ID
”.
1. Press the
button to engage the
Menu mode.
The display will show the Menu Number and the
Menu Item.
2. Rotate the
knob to select the Menu item to
be modied.
3. Touch
[
]
on the LCD, then rotate the
knob to change the current setting of the se-
lected Menu item.
Touch
[
]
on the LCD to cancel the setting.
$''2.8'.'
0$ .'8 .'
0$ 4' ',1%6+ 0 F$
4. When the adjustment or setting is completed, touch
[
]
on the LCD to save the new setting, then
press the
button or touch
[
]
on the LCD to exit to normal operation.
$''2.8'.'
0$ .'8 .'
0$ 4' ',1%6+ 0 F$
MULTI Knob
MENU
(
SETUP
)
Button
Menu Resetting
Use this procedure to restore the Menu settings to
their factory defaults, without affecting the pro-
grammed frequency memories.
1. Press the front panel
switch to turn the
transceiver o.
2. While holding the
button in,
press and hold in the front panel
switch
to turn the transceiver on. Once the transceiver
comes on, release the buttons.
MENU
(
SETUP
)
ButtonON/OFF Switch
OGUE
#)%
#)%
#)%
(5#'6&.#;
'& .#;
'&.#;
/&+
51.9
OGUE
OGUE
Menu Number Setting value
Menu Item
To Next Page
Loading...
Need help?
General
