Yaesu FT-991A User Manual

Page 111FT-
991



If desired, memories just within a particular Memory Group may be recalled.
1. Press the

button, if necessary, to enter the
“Memory” mode.
2. Press the
F



button, then touch
[

]
on
the LCD. The “

” icon will appear on the dis-
play.
F
(
M-LIST
)
Button
V/M ButtonMULTI Knob
3. Rotate the

knob to select the desired Memo-
ry Group.
4. Touch
[

]
on the LCD. The “

” icon will
appear on the display.
5. Rotate the

knob to select the desired Memo-
ry Channel within the Selected Memory Group.

If no channels have been assigned to a particular Memo-
ry Group, that Group cannot be accessed.


Yaesu FT-991A Specifications

General

Type	HF/VHF/UHF Transceiver
Receiver Type	Triple Conversion Superheterodyne
Antenna Impedance	50 Ohms, Unbalanced
Supply Voltage	13.8V DC ±15%
IF DSP	Yes
Real-Time Spectrum Scope	Yes
Automatic Antenna Tuner	Yes
Waterproof	No
Built-in Sound Card	Yes
USB Port	Yes
Modes	AM, FM, SSB, CW
Weight	4.3 kg
Antenna Connector	SO-239
Current Consumption	22A (Transmit)
Output Power	100W (HF/50MHz), 50W (VHF/UHF)
Display	3.5 inch TFT Full Color LCD