Making Global and Other Important Settings — Function
PF-1000
126
The explanations here apply to step #3 of the procedure on page 122.
Setting Song-related Parameters — Song Settings
Quick Start
On some commercially avail-
able song data, certain set-
tings related to the song
(such as voice selection, vol-
ume, etc.) are recorded to
the first measure, before the
actual note data. When
Quick Start is set to “ON,”
the PF-1000 reads all initial
non-note data of the song at
the highest possible speed,
then automatically slows
down to the appropriate
tempo at the first note. This
allows you to start playback
as quickly as possible, with a
minimum pause for reading
of data.
n
Channel
Refers to the MIDI channel
(page 147). The channels
are assigned as follows:
Song
1 - 16
Accompaniment Style
9 - 16
n
Phrase Mark
This data specifies a certain
location in the song data.
E
D
C
B
A
J
I
H
G
F
2 31 5 6 7 84
Turns Quick Start on/off (see note).
Allows you to play back all songs
from the same folder continuously.
Determines the MIDI channel assigned
to the [TRACK2] button.
Determines the MIDI channel assigned
to the [TRACK1] button.
When set to “ON,” this automatically sets
the proper Track 1 and Track 2 channels.
Normally, this should be set to “ON.”
Determines the language of the
displayed lyrics.
When this is set to “AUTO,” the
language defaults to that of the
song data. When not set to “AUTO,”
the language defaults to Japanese,
when the internal setting
(page 140) is “JAPANESE”; for all
other languages, this is set to
“INTERNATIONAL.”
Determines whether the Phrase
Mark Repeat function for the song is
on or off. When this is on, you can
repeatedly play back a specified
phrase (selection of measures) of
the song. The method for specifying
a phrase mark is the same as that in
the SONG POSITION display
(page 76).
To Next Page
Loading...
Need help?
General
