Yealink T3 Series User Manual

Yealink T3 Series IP Phones User Guide
31
Performing a Blind Transfer
You can transfer a call to another contact immediately without consulting with her/him first.
Procedure
1. Press the TRAN key or Transfer (Trans) during a call.
2.
Do one of the following:
l Enter the number or select a contact from the placed call list you want to transfer to.
l If you have set a Speed Dial key, you can also press the Speed Dial key to transfer the call to the contact dir-
ectly.
l
Press Directory (Dir). Select the desired contact from the Directory list.
3. Press B Transfer (B Trans) or the TRAN key to complete the transfer.
Tip: If you are using a handset, the transfer can be completed by hanging up the handset.
Performing a Semi-Attended/Attended Transfer
You can transfer calls to other contacts immediately when receiving ringback or after consulting with them first.
Procedure
1. Press the TRAN key or Transfer (Trans) during a call.
2.
Do one of the following:
l Enter the number or select a contact from the placed call list you want to transfer the call to.
l
Select Directory (Dir). Select the desired contact from the Directory list.
3. Press the OK key or select Send.
4.
Do one of the following:
l
When you hear the ringback tone, press the TRAN key or Transfer (Trans) to finish a semi-attended transfer.
l
After the contact answers the call, press the TRAN key or Transfer (Trans) to finish an attended transfer (con-
sultative transfer).
Tip: If you are using a handset, the transfer can be completed by hanging up the handset.
Performing Transfer with a Transfer Key
By default, you can transfer a call to a specific contact directly using a Transfer key during a call.
Your system administrator can also set your phone to perform attended transfer when using a Transfer key.
Topics
Setting a Transfer Key
Performing a Blind Transfer Using a Transfer Key
Performing a Semi-attended/Attended Using a Transfer Key
Performing a Call Transfer by Selecting a Transfer Mode
Setting a Transfer Key
You can set a line key as a Transfer key, and specify a contact you want to transfer a call to for this key.
Line key is not available on the T30P/T30 phones, so ask your system administrator to set a Transfer key for your
phone.
Procedure
1. Go to Menu > Features > Dsskey.
2.
Select the desired line key.
3. Select Key Event from the Type field.

Yealink T3 Series Specifications

General

Brand	Yealink
Model	T3 Series
Category	IP Phone
Language	English