Advanced Call Features
41
Before You Begin
Your system administrator has enabled the group call pickup and set the group call pickup code.
Procedure
1.
Pick up the handset, press the line key or the Speakerphone key.
The GPickup appears on the phone screen.
2. SelectGPickup on your phone when any phone in the group receives an incoming call.
The call is answered on your phone.
Tip: When the phone is idle, you can use a Group Pickup key to pick up a group call directly.
Related Topic
Picking up a Call with a Group Pickup Key
Picking up a Call with a Pick Up Key
You can easily use a Pick Up key to pick up a call to a specific contact’s phone.
Before You Begin
Ask your system administrator for the directed call pickup code. If you are using the T30P/T30 phones and check
with your system administrator if the Directed Pickup key has set for your phone.
Procedure
1. Go to Menu > Features > Dsskey.
2.
Select the desired line key.
3. Select Key Event from the Type field.
4. Select Pick Up from the Key Type field.
5. Select the desired line from the Account ID field.
6.
Do one of the following:
l
(Optional.) Enter the string that will display on the phone screen in the Label field.
Enter the directed call pickup code followed by the specific extension in the Value field.
l
On the T33P/T33G phones, highlight the Label or Value field. Select Directory (Dir) and select the desired
contact from the Directory list.
7. Select Save.
Tip: By default, you can long press the desired line key to set it.
When the target phone receives an incoming call, you can press the Pick Up key, and the call is answered on your
phone.
Picking up a Call with a Group Pickup Key
You can easily select a Group Pickup key to pick up a group call.
Before You Begin
Check with your system administrator if the group call pickup code is required for this key. If required, get the group
call pickup code from your system administrator. If you are using the T30P/T30 phones, check with your system
administrator if the Group Pickup key has set for your phone.
Procedure
1. Go to Menu > Features > Dsskey.
2.
Select the desired line key.
To Next Page
Loading...
Need help?
General
