Yealink T3 Series IP Phones User Guide
44
Before You Begin
Your system administrator has set call park in the Transfer mode. There is a call parked on the shared parking lot.
Procedure
1. Select Retrieve (You may need to select the More( ) > Retrieve) on the dialing screen.
The phone will retrieve the parked call from the shared parking lot.
Tip: When the phone is idle, you can use a Retrieve key to retrieve a parked call directly.
Related Topic
Parking or Retrieving a Call with a Park or Retrieve Key
Parking or Retrieving a Call with a Park or Retrieve Key
You can easily use a Park key to park a call to a specific extension (if the FAC mode is set) or shared parking lot (if
the Transfer mode is set), and quickly retrieve this parked call using a retrieve key.
Topics
State Indicator of the Park/Retrieve key
Parking a Call using a Park Key
Retrieving a Parked Call using a Retrieve Key
State Indicator of the Park/Retrieve key
On T33P/T33G phones, you can get the call park/retrieve status by viewing the icon indicator of the Park/Retrieve
key.
Icons Description Icons Description
Park successfully/Idle state. Park failed.
Ringing state. Retrieve parked call.
Parking a Call using a Park Key
You can set a line key as a Park key, and specify an extension or a shared parking lot you want to park a call to for
this key. By using the Park key you can park a call quickly.
Before You Begin
Check with your system administrator if the FAC or Transfer mode is set on your phone, and if Account ID is neces-
sary for this key.
Procedure
1. Go to Menu > Features > Dsskey.
2.
Select the desired line key.
3. Select Key Event from the Type field.
4. Select Call Park from the Key Type field.
5. (Optional.) Select the desired line from the Account ID field.
6.
Do one of the following:
l
(Optional.) Enter the string that will appear on the phone screen in the Label field.
Enter the park extension number or the shared parking lot you want to park the call to in the Value field.
l
On the T33P/T33G phones, highlight the Label or Value field. Select Directory (Dir) and select the desired
contact from the Directory list.
7. Select Save.
To Next Page
Loading...
Need help?
General
