Yealink T3 Series IP Phones User Guide
48
Performing a Blind Transfer
During a call, you can transfer the call to the monitored contact in a blind-transfer way.
Before You Begin
Check with your system administrator if the Transfer Mode via Dsskey is set to Blind Transfer.
Procedure
1.
During a call, press the BLF key of the monitored line which you want to transfer this call to.
Performing a Semi-attended/Attended Transfer
During a call, you can transfer the call to the monitored contact in the semi-attended/attended-transfer way.
Before You Begin
Check with your system administrator if the Transfer Mode via Dsskey is set to Attended Transfer.
Procedure
1.
During a call, press the BLF key of the monitored line which you want to transfer this call to.
The phone will dial out the number of the monitored line.
2. Press the BLF key of the monitored line again or Transfer (Trans) to complete the transfer when the monitored
user receives ringback or after the monitored user answers the call.
Parking or Retrieving a Call by BLF Key
You can use the BLF key to park a call or retrieve a parked call directly.
Note: Check with your system administrator to find out if it is available on your phone.
Topics
Parking a Call to a Monitored Line
Retrieving a Parked Call
Parking a Call to a Monitored Line
During the call, you can use the BLF key to park the current call to a monitored line directly.
Before You Begin
Your system administrator has set call park feature in the FAC mode in advance.
Procedure
1. During a call, selectPark (You may need to select the More( ) > Park).
2.
Press the desired BLF key to park the call to the monitored line.
Retrieving a Parked Call
You can use the BLF key to retrieve a call that is parked to the monitored line.
Before You Begin
Your system administrator has set call park feature in the FAC mode.
Procedure
1. Select Retrieve on the dialing screen.
2.
Press the desired BLF key to retrieve a call that is parked to the monitored line.
To Next Page
Loading...
Need help?
General
