Yealink T3 Series IP Phones User Guide
56
Topics
State Indicator of the Intercom key
Placing an Intercom Call
Picking up an Incoming Call of the Target Extension
Answering an Intercom Call
State Indicator of the Intercom key
On T33P/T33G phones, you can get the intercom status by viewing the icon indicator of the Intercom key.
Icons Description Icons Description
Target extension is available. Target extension is ringing.
Callout
Target extension is dialing.
Talking
Target extension is busy or is in a
call.
Target extension fails to register.
Placing an Intercom Call
You can place an intercom call to quickly relay a message to a contact.
The target phone plays a warning tone and automatically answers the call in speakerphone (hands-free) mode by
default. When the target phone has an active call, the intercom call is answered automatically after the active call
ends.
You can also press the BLF/BLF List key to initiate an outgoing intercom call to the monitored user. Check with your
system administrator to find out if it is available on your phone.
Before You Begin
If you are using the T30P/T30 phones, check with your system administrator if the Intercom key has set for your
phone.
Procedure
1. Go to Menu > Features > Dsskey.
2.
Select the desired line key.
3. Select Intercom from the Type field.
4. Select the desired line from the Account ID field.
5.
Do one of the following:
l
(Optional.) Enter the string that will appear on the phone screen in the Label field.
Enter the target extension number in the Value field.
l
On the T33P/T33G phones, highlight the Label or Value field. Select Directory (Dir) and select the desired
contact from the Directory list.
6. Select Save.
7.
Press the Intercom key to place an intercom call.
Tip: By default, you can long press the desired line key to set it.
Related Topic
Setting a BLF Key
Picking up an Incoming Call of the Target Extension
You can pick up the target extension's incoming call by pressing the Intercom key.
To Next Page
Loading...
Need help?
General
