| Calling | 22
Procedure
1. Go to More > Setting > Basic > Call Features.
2. Enable Auto Answer Multiway.
Muting Automatically Answered Calls
You can choose to mute the local microphones when a call is answered automatically, which avoids the
caller hearing the local conversation freely.
About this task
This feature takes effect only when the auto answer feature is enabled.
Procedure
1. Go to More > Setting > Basic > Call Features.
2. Enable Auto Answer Mute.
DND (Do Not Disturb)
You can enable DND feature to reject incoming calls automatically. All the rejected calls will be recorded
to the missed call list. To prevent callers from interrupting the active call, you can enable DND during an
active call. The DND feature will be disabled automatically after the call ends.
About this task
Procedure
1. Go to More.
If you are having a call on your system, press the OK Key to open the Talk Menu and go to More.
2. Select DND.
The DND icon is displayed in the status bar of the monitor. The system will reject all incoming calls
automatically.
Rejecting Incoming Calls
Procedure
Press Hang up Key or go to Reject.
Ending Calls
Procedure
Press Hang up Key.
To Next Page
Loading...
Need help?
General