| Content Sharing | 26
Note: If your administrator does not purchase a collaboration service, you cannot use the
whiteboard and content sharing features during the conference. Please contact your administrator.
• Sharing Content with VCH51 Video Conferencing Hub
• Using WPP20 Wireless Presentation Pod
• Sharing Content via Apple Device
• Sharing Content by Miracast Presentation
Sharing Content with VCH51 Video Conferencing Hub
In a meeting room, you can connect VCH51 to your PC with HDMI cable for content sharing.
Before you begin
Make sure the computer is powered on and connected to the VCS endpoint.
About this task
Note: For more information the connection between the system and VCH51, refer to Yealink
VCH51 Quick Start Guide.
Procedure
The system will connect to the wired sharing and display the sharing content automatically. If the system
does not start sharing content automatically, do one of the following to start sharing content manually:
• Go to Presentation on the idle screen.
• In a conference, press the OK key to open Talk Menu, and then go to Presentation.
Using WPP20 Wireless Presentation Pod
In a meeting room, you can connect WPP20 to your PC with HDMI cable for content sharing.
Note: If you cannot present after connecting WPP20 to the PC, refer to Yealink WPP20 Wireless
Presentation Pod Quick Start Guide to pair the system and WPP20.
• Sharing Content via WPP20
• Switching the Shared Content via WPP20
To Next Page
Loading...
Need help?
General