| Call Features | 54
Switching Among the Receiver, Handsfree and Headset Modes
You can select the desired mode before placing a call, or can alternate among receiver, handsfree, and
handset modes during a call.
About this task
You can place a call using the following call modes:
• Receiver mode—pressing the Off-hook key to dial out.
• Handsfree mode—pressing the Speakerphone key to dial out.
• Headset mode—connecting a standard 3.5mm headset.
Silencing or Rejecting Incoming Calls
When you receive an incoming call, you can choose to silence or reject the call instead of answering.
• Silencing a Call
• Rejecting a Call Manually
• Rejecting Anonymous Calls
• Rejecting Calls with Do Not Disturb (DND)
Silencing a Call
You can silence a call to stop your phone from ringing. Even if you silence the call, the incoming call
notification continues to be displayed on your phone.
Procedure
Select Silence.
Rejecting a Call Manually
You can reject a call manually, and the call may be sent to voice mail. The rejected calls are displayed in
the Received Calls list in your History list.
Procedure
Press or Reject.
Rejecting Anonymous Calls
You can reject incoming calls from the callers who have hidden their identities. As a result, your phone will
not ring and you will not be notified of an attempted call.
Procedure
1. Go to OK > Call Features > Anon.Call Rejection.
On the CP930W, go to Menu > Features > Anon.Call Rejection.
On the DD phone, go to Menu > Features > Anonymous Call.
On the CP935W, go to More > Features > Anonymous Call.
2. Select the desired line.
3. Enable local anonymous rejection.
To Next Page
Loading...
Need help?
General
