| Audio Settings | 99
Switching off Silent Mode
If you want to resume the incoming ring, you can switch off silent mode.
Procedure
Long press the * key until the phone prompts “All Ring Tones On”.
The silent icon disappears from the status bar.
Adjusting the Volume
You can adjust the volume of the ringer, media, and audio during a call.
Procedure
Do one of the following:
• Press the Volume key.
• Press the left or right navigation key when the handset is idle.
• Go to OK > Settings > Audio > Ring Tones > Volume and press the left or right navigation key.
On the CP930W/CP935W, press the Volume touch key.
On the DD phone, press the Volume key .
Setting the Ring Tone
Ring tones are used to indicate the incoming calls.
• Setting the Ring Tone for the Internal Calls
• Setting the Ring Tone for the External Calls
Setting the Ring Tone for the Internal Calls
You can select a unique ring tone for the internal calls, so that you can identify callers when the phone
rings.
Procedure
1. Go to OK > Settings > Audio > Ring Tones > Melodies.
On the CP930W, go to Menu > Settings > Basic Settings > Sound > Ring Tones > Intercom Call.
On the CP935W, go to More > Basic > Sound > Ring Tones > Intercom Call.
2. Select the desired ring tone.
The ring tone is played automatically.
3. Confirm the action.
Setting the Ring Tone for the External Calls
You can select a unique ring tone for the external calls so that you can identify callers when the phone
rings.
To Next Page
Loading...
Need help?
General
