To Next Page

To Previous Page

| Audio Settings | 98

Procedure

1. Go to Menu > Settings > Advanced Settings (default PIN: 0000) > Softkey Label.

2. Select the desired soft key.

3. Select the desired key type from the Type field.

4. Confirm the action.

Note: If you replace another key of the Menu soft key on CP930W, you can access the phone

settings by pressing the OK key. For DD phone, we recommend that you keep a Menu soft key;

otherwise, you may not access the phone settings.

Phone Mode

You can freely switch between Wi-Fi and DECT modes according to actual usage scenarios.

Note: It is only applicable to CP935W.

Procedure

1. Tap More > Basic > Phone Mode.

2. Select the desired mode.

3. Confirm the action.

Audio Settings

You can change the basic audio settings on your phone.

• Silent Mode

• Adjusting the Volume

• Setting the Ring Tone

• Silent Charging

• Setting the Advisory Tone

• Setting the Vibrator

• Disabling the Noise Cancellation

Silent Mode

You can enable the silent mode if you do not want to be disturbed. The handset will not ring when receiving

an incoming call, but it will still display the incoming call information.

It is only applicable to W73H/W78H/W56H/W53H/W59R/W57R.

• Switching on Silent Mode

• Switching off Silent Mode

Switching on Silent Mode

You can silence an incoming call by switching on silence mode to stop your phone from ringing.

Procedure

Long press the * key until the phone prompts “All Ring Tones Off”.

The silent icon appears in the status bar.

Yealink W56B User Manual

Other manuals for Yealink W56B