YOKOGAWA CW240 User Manual

10-19
IM CW240E
Using the Communication Function (RS-232)
10
10.3 Using a Printer
● Measurement/Display Screen Printout
1 To the Measure screen
The Measure screen is displayed.
The following paragraph describes the screen data-printing procedure
taking the Power screen as an example.
TOP
MENU
ENTER
ENTER
LIGHT
TOP
MENU
SAVE
A
RANGE
START
&STOP
ESC
ENTER
F 1
F 2 F 3 F 4 F 5
DISP COPY
RANGE
F 1
It is recommended that when printing display screen data, press the F5 key to
hold the readings and then press the DISP COPY key to save them.
2 Copying screen data
DISP COPY
Press the DISP COPY key.
This causes currently displayed screen data to be printed out on the
printer.
The
mark flashes on the printer during printing.
NOTE
• If RS-232 CONNECT is set to PRINTER, the mark is indicated on the screen.
• During integration measurement (including being on standby), screen data
cannot be printed out on the printer.
SEE ALSO
For the setting procedure, see Chapter 6, Configuring Settings.
For more information on data save, see Chapter 8, Saving Measured Data, and
Section 8.5, Copying Screen Data (Hard copy).

YOKOGAWA CW240 Specifications

General

Brand	YOKOGAWA
Model	CW240
Category	Measuring Instruments
Language	English