YOKOGAWA DL350 User Manual

4-147
IM DL350-17EN
Commands
1
2
3
4
5
App
Index
4.29 STATus Group
The commands in this group are used to make settings and queries related to the status report. There are no top
menu items that correspond to the commands in this group. For information about status reports, see chapter 5.
:STATus:QENable
Function Sets or queries whether messages other than
errors will be stored to the error queue (ON) or
not (OFF).
Syntax
:STATus:QENable {<Boolean>}
:STATus:QENable?
Example
:STATUS:QENABLE ON
:STATUS:QENABLE?
-> :STATUS:QENABLE 1
:STATus:QMESsage
Function Sets or queries whether message information will
be attached to the response to the :STAT:ERR?
query (ON) or not (OFF).
Syntax
:STATus:QMESsage {<Boolean>}
:STATus:QMESsage?
Example
:STATUS:QMESSAGE ON
:STATUS:QMESSAGE?
-> :STATUS:QMESSAGE 1
:STATus?
Function Queries all the settings for the communication
status feature.
Syntax
:STATus?
:STATus:CONDition?
Function Queries the contents of the condition register.
Syntax
:STATus:CONDition?
Example
:STATUS:CONDITION? -> 16
Description For details on how to use the :STATus:CONDition
command to establish synchronization, see page
3-9.
:STATus:EESE
Function Sets or queries the extended event enable
register.
Syntax
:STATus:EESE <Register>
:STATus:EESE?
<Register> = 0 to 65535
Example
:STATUS:EESE #B00000000
:STATUS:EESE? -> :STATUS:EESE 0
:STATus:EESR?
Function Queries the contents of the extended event
register and clears the register.
Syntax
:STATus:EESR?
Example
:STATUS:EESR? -> 0
:STATus:ERRor?
Function Queries the error code and message of the last
error that has occurred.
Syntax
:STATus:ERRor?
Description • If no errors have occurred, 0
,"
No error
”
is
returned.
• You can use the :STATus:QMESsage
command to specify whether the message is
included.
:STATus:FILTer<x>
Function Sets or queries the transition filter.
Syntax
:STATus:FILTer<x> {RISE|FALL|BOTH|
NEVer}
:STATus:FILTer<x>?
<x> = 1 to 16
Description Set how each bit in the condition register must
change to trigger the setting of an event. If you
specify RISE, a change from 0 to 1 triggers the
setting of an event.

YOKOGAWA DL350 Specifications

General

Brand	YOKOGAWA
Model	DL350
Category	Recording Equipment
Language	English