YOKOGAWA DL350 User Manual

4-42
IM DL350-17EN
:CHANnel<x>:CAN:OSOut:EXECute (One
Shot Out)
Function Executes a one-shot output from a module that
can monitor CAN bus signals.
Syntax
:CHANnel<x>:CAN:OSOut:EXECute
CAN Bus Monitor Module (720240) or
the CAN/CAN FD monitor module (720242)
<x> = 1 to 4
CAN & LIN Bus Monitor Module (720241)
<x> = 1, 3
Example
:CHANNEL3:CAN:OSOUT:EXECUTE
:CHANnel<x>:CAN:OSOut:FRAMe
Function Sets or queries the frame type of one-shot output
data of the specified port of a module that can
monitor CAN bus signals.
Syntax
:CHANnel<x>:CAN:OSOut:FRAMe {DATA|
REMote}
CAN Bus Monitor Module (720240) or
the CAN/CAN FD monitor module (720242)
<x> = 1 to 4
CAN & LIN Bus Monitor Module (720241)
<x> = 1, 3
Example
:CHANNEL3:CAN:OSOUT:FRAME DATA
:CHANNEL3:CAN:OSOUT:FRAME?
-> :CHANNEL3:CAN:OSOUT:FRAME DATA
:CHANnel<x>:CAN:OSOut:MFORmat
(Message Format)
Function Sets or queries the frame message format of one-
shot output data of the specified port of a module
that can monitor CAN bus signals.
Syntax
:CHANnel<x>:CAN:OSOut:
MFORmat {EXTended|STANdard}
CAN Bus Monitor Module (720240) or
the CAN/CAN FD monitor module (720242)
<x> = 1 to 4
CAN & LIN Bus Monitor Module (720241)
<x> = 1, 3
Example
:CHANNEL3:CAN:OSOUT:MFORMAT EXTENDED
:CHANNEL3:CAN:OSOUT:MFORMAT?
-> :CHANNEL3:CAN:OSOUT:
MFORMAT EXTENDED
:CHANnel<x>:CAN:OSOut:MID (Message ID)
Function Sets or queries the frame message ID of one-
shot output data of the specified port of a module
that can monitor CAN bus signals.
Syntax
:CHANnel<x>:CAN:OSOut:MID {<String>}
CAN Bus Monitor Module (720240) or
the CAN/CAN FD monitor module (720242)
<x> = 1 to 4
CAN & LIN Bus Monitor Module (720241)
<x> = 1, 3
• When the :CHANnel<x>:CAN:OSOut:MFORmat
command is set to STANdard
<String> = “0” to “7FF”
• When the :CHANnel<x>:CAN:OSOut:MFORmat
command is set to EXTended
<String> = “0” to “1FFFFFFF”
Example
:CHANNEL3:CAN:OSOUT:MID "7FF"
:CHANNEL3:CAN:OSOUT:MID?
-> :CHANNEL3:CAN:OSOUT:MID "7FF"
:CHANnel<x>:CAN:OSOut:MTYPe (Message
Type)
Function Sets or queries the frame message type (CAN/
CAN FD) of one-shot output data of the specified
sub channel on a module that can monitor a CAN
bus.
Syntax
:CHANnel<x>:CAN:OSOut:
MTYPe {CANMessage|CANFdmessage}
:CHANnel<x>:CAN:OSOut:MTYPe?
<x> = 1 to 4
Example
:CHANNEL1:CAN:OSOUT:
MTYPE CANFDMESSAGE
:CHANNEL1:CAN:OSOUT:MTYPE? ->
:CHANNEL1:CAN:OSOUT:
MTYPE CANFDMESSAGE
Description This command is valid when the CAN/CAN FD
monitor module is installed.
:CHANnel<x>:CAN:PORT?
Function Queries all settings of the specified port of a
module that can monitor CAN bus signals.
Syntax
:CHANnel<x>:CAN:PORT?
CAN Bus Monitor Module (720240) or
the CAN/CAN FD monitor module (720242)
<x> = 1 to 4
CAN & LIN Bus Monitor Module (720241)
<x> = 1, 3
4.6 CHANnel Group

YOKOGAWA DL350 Specifications

General

Brand	YOKOGAWA
Model	DL350
Category	Recording Equipment
Language	English