11 - 2 LI4278 Product Reference Guide
Errors While Scanning
Unless otherwise specified, to correct an error during a scanning sequence, just re-scan the correct parameter.
Symbology Parameter Defaults
Table 11-1 lists the defaults for all symbologies parameters. To change the default values, scan the appropriate
bar codes in this guide. These new values replace the standard default values in memory. To recall the default
parameter values, scan the Default Parameters on page 5-4.
NOTE See Appendix A, STANDARD DEFAULT PARAMETERS for all user preferences, hosts, and
miscellaneous default parameters.
In this guide, the parameter numbers listed are the same as the attribute numbers for these parameters.
Table 11-1
Parameter Defaults
Parameter
Parameter
Number
Default
Page
Number
UPC/EAN
UPC-A 1 Enable
11-6
UPC-E 2 Enable
11-6
UPC-E1 12 Disable
11-7
EAN-8/JAN 8 4 Enable
11-7
EAN-13/JAN 13 3 Enable
11-8
Bookland EAN 83 Disable
11-8
Decode UPC/EAN/JAN Supplementals (2 and 5 digits) 16 Ignore
11-10
User-Programmable Supplementals
Supplemental 1:
Supplemental 2:
579
580
000 (zeroes)
11-12
UPC/EAN/JAN Supplemental Redundancy 80 10
11-12
UPC/EAN/JAN Supplemental AIM ID Format 672 Combined
11-13
Transmit UPC-A Check Digit 40 Enable
11-14
Transmit UPC-E Check Digit 41 Enable
11-14
Transmit UPC-E1 Check Digit 42 Enable
11-15
UPC-A Preamble 34 System Character
11-16
UPC-E Preamble 35 System Character
11-17
UPC-E1 Preamble 36 System Character
11-18
Convert UPC-E to A 37 Disable
11-19
To Next Page
Loading...
Need help?
General
Weight and Dimensions
