241
ESSENTIAL TECHNICAL PARAMETERS
CALCULATION OF TRACTOR LOAD LIMIT
Connection of machines to the front or rear hydraulic arms must not exceed the allowed total load of the tractor, individual axles
and tractor tyres. Therefore make sure before buying the aggregation that these assumptions are fulfilled using the following
calculation:
The following data must be known for the calculation:
T
L
(kg) - instantaneous mass (1)
Tv (kg) - instantaneous front axle load (1)
T
H
(kg) - instantaneous rear axle load (1)
G
H
(kg) - total machine weight suspended in the rear / rear load (2)
G
V
(kg) - total machine weight suspended in the front / front load (2)
a (m) - distance between the gravity centre of the front carried machine / front load and load through the centre of the front axle (2,3)
b (m) - tractor wheelbase (1,3)
c (m) - distance between the centre of the rear axle and the centre of fixing holes of lower hydraulic arms (1,3)
d (m) - distance between the centre of fixing holes of lower hydraulic arms and the gravity centre of the machine suspended in
the rear / rear load (2)
(1) see instructions for use of the tractor
(2) see instructions for use of the machine
(3) machine measurement
To Next Page
Loading...
Need help?
General