37
GETTING TO KNOW THE TRACTOR
P13N003
DRIVER'S SEAT SEARS
The driver's seat Sears can be made with a mechanical (A) or pneumatic (B) suspension.
1. The seat suspension adjustment controller according to the driver's weight (turn it in the direction based on icons shown on the
seat bellows)
2. The seat height adjustment controller (release the controller to increase the seat height, tighten the controller to decrease the
seat height)
3. The longitudinal seat adjustment lever (pull the lever to adjust the seat lengthwise, return the lever back to its original position
to lock the longitudinal adjustment)
4. The seat backrest inclination adjustment controller (pull the lever to adjust the seat backrest inclination, return the lever back
to its original position to lock the backrest position)
5. Foldable armrest
6. The armrest height locking adjustment (release the controller to adjust the height of the armrest, tighten the controller to lock
the armrest position)
7. The seat vibration absorption setting (move the controller up to get the float seat position, move the controller to the lower
position to lock it)
8. The seat height adjustment and seat suspension adjustment according to the weight of the driver (push the controller to in-
crease the air pressure in the pneumatic suspension of the seat - when the driver´s weight is bigger, pull the controller to de-
crease the air pressure in the pneumatic suspension of the seat - at the lower weight of the driver
To Next Page
Loading...
Need help?
General