User Manual
23
Please set SSL to “On” via Gmail.com server, and set to “Off” via other mail server.
Picture 5-34
Receiver address: indicates receiver’s email address. The email address is used to receive
image transmitted from motion detection alarm of DVR. Please clear the images you have
received as soon as possible to avoid overloading your email account.
For detailed SMTP protocols settings refer to the below picture 5-35 & Picture 5-36.
Picture 5-35 Picture 5-36
5.3.4.4 Mobile Set
The DVR is currently compatible with mobile phones running Andriod, Windows Mobile, Symbian
operating systems, Iphone and Black berry on 3G networks.
Picture 5-37
Please note that the server port is not equal to the port you have set to network set.
SMTP Port: indicate one kind of mail transmittal
port opened by Simple Message Transfer Protocol
(SMTP). The port number for most mails is 25
except such as Gmail server (Port number: 465).
SMTP server: indicates server address you used.
Sender address: indicates sender’s email
address. The email address should be consistent
with the server you use. That is to say, when you
use email address – aaa@gmail.com
, the
according server should be smtp.gmail.com.
Click [Main menuNetworkMobile] to enter into [Mobile]
set interface shown as Picture 5-37
User Name: indicate user name of DVR, and support
numbers and characters
User password: indicate user password of DVR
Server port: Mobile monitoring port. Setting range is
between 1024 and 65535.
To Next Page
Loading...
Need help?
General
