User Manual
24
5.3.4.5 NTP function
Picture 5-38
5.3.6 Device Management
5.3.6.1 HDD Set
Click [Main menuDeviceHDD] to enter into the interface shown as Picture 5-39.
Picture 5-39
Picture 5-40
Auto-overwrite – When set to ENABLE the DVR will record over the oldest files on the hard
drive. The DVR will always be able to record events as they happen, however, it does means that
you’ll need to get important events off the HDD before they’re overwritten; and if overwrite is set to
DISABLE the DVR will stop record once the DVR is full. Whilst you won’t lose old footage, you run the
risk of missing new events as they happen. Be sure you want to do this before selecting it.
HDD Format – Formatting the HDD will erase all data (i.e. footage) which is stored on it, and
re-create the FAT (file allocation table).
USB Format - If you have a USB flash drive connected to the DVR, you can format that, too. To
do this, click the [USB Format] button and click [OK].
Note: It is an important first step when configuring your DVR to make sure that the hard drive (HDD)
options are correctly set. So, strongly suggest that you do format the HDD before start the first record.
NTP Service ： Allow you enable/disable the NTP
function.
Server Address: currently support three servers,
including time.windows.com, time.nist.gov and
pool.ntp.org.
Time Zone: System supports thirty Time Zones.
Update now: Click [Update Now] button to change the
above NTP set.
Note: The above change will be available only when
system connected to internet.
When DVR is connected to a HDD, the system will
automatically detect if HDD is normal or not;
If the cable connected to HDD is loosen or HDD is abnormal,
HDD status will be shown as “No Disk”, or, If HDD need to be
formatted, status will be shown as “no format”, otherwise, the
HDD status will be shown as “Normal”
NO: indicate HDD no pre-seted by system.
Status:：It will be available only when HDD have been
formatted.
Total Space – Total size of the hard drive currently
installed.
Free Space – Total amount of free space available on
the hard drive currently installed.
Useable Rec. Time – Free space currently available in
hours.
To Next Page
Loading...
Need help?
General
