User Manual
32
Chapter 6: Web Application Manager
6.1 Plug-in download and installation
Open your web browser and input the IP address and web port of DVR, such as ：
http://172.18.6.202:8080/
. If your computer is connected to internet, it will download and install “ActiveX”
Plug-in automatically. If your computer system is Vista, you may need to setup the user authority. Details
please refer to the below picture: Start →setup→ control panel （Tick “√” use UAC to help protect your
computer and confirm OK）.
Vista system:
Vista
Win-7 system:
Reminder: If the plug-in program is not downloaded successfully, please check if your browser’s
safety level or firewall setting is too advanced. Please run IE →Tools→Internet options→Internet
Custom level→Enable the options (details please refer to the below Picture 6-2).
Picture 6-1
If running the web application for the first time, you
need about one minute to finish download and install
plug-in, please wait patiently.
Note: If you want to use the undated webcam
at one computer which you already login before,
please delete the old IE webcam and click
[StartRun] to input the command characters:
“regsvr32/u HiDvrOcx.ocx”, then login again.
WIN7-1 WIN7-2
To Next Page
Loading...
Need help?
General
