ABB FENA-21 User Manual

EtherNet/IP – Communication protocol 231
Instance #2: FENA-01/-11/-21 configuration parameters
group B (group 2)
The actual parameter group number depends on the drive type.
Group B (group 2) corresponds to:
• parameter group 55 in ACS355
• parameter group 53 in ACSM1, ACS850 and ACQ810
• parameter group 53 in ACS880 and ACS580 if the adapter is
installed as fieldbus adapter A or group 56 if the adapter is
installed as fieldbus adapter B.
# Attribute name Services Description Data
type
1 Configuration Group B
(Group 2) - Parameter 1
Get, Set See 01 DATA OUT 1
on page 130.
UINT16
2 Configuration Group B
(Group 2) - Parameter 2
Get, Set See 01 DATA OUT 1
on page 130.
UINT16
3 Configuration Group B
(Group 2) - Parameter 3
Get, Set See 01 DATA OUT 1
on page 130.
UINT16
4 Configuration Group B
(Group 2) - Parameter 4
Get, Set See 01 DATA OUT 1
on page 130.
UINT16
5 Configuration Group B
(Group 2) - Parameter 5
Get, Set See 01 DATA OUT 1
on page 130.
UINT16
6 Configuration Group B
(Group 2) - Parameter 6
Get, Set See 01 DATA OUT 1
on page 130.
UINT16
7 Configuration Group B
(Group 2) - Parameter 7
Get, Set See 01 DATA OUT 1
on page 130.
UINT16
8 Configuration Group B
(Group 2) - Parameter 8
Get, Set See 01 DATA OUT 1
on page 130.
UINT16
9 Configuration Group B
(Group 2) - Parameter 9
Get, Set See 01 DATA OUT 1
on page 130.
UINT16
10 Configuration Group B
(Group 2) - Parameter
10
Get, Set See 01 DATA OUT 1
on page 130.
UINT16

ABB FENA-21 Specifications

General

Brand	ABB
Model	FENA-21
Category	Adapter
Language	English