ABB FENA-21 User Manual

24 Introduction to the manual
Contents
The manual consists of the following chapters:
• Safety instructions gives the safety instructions which you
must obey when you install a fieldbus adapter module.
• Overview of the Ethernet network and the FENA-01/-11/-21
module contains a short description of the Ethernet network
and the adapter module.
• Mechanical installation contains a delivery checklist and
instructions on installing the adapter module.
• Electrical installation contains instructions on cabling and
connecting the adapter module to the Ethernet network.
• Technical data contains the technical data of the adapter
module and the Ethernet link.
• Appendix A – PROFIdrive parameters and I&M records of
PROFINET IO contains the PROFIdrive profile parameters and
telegram and response structures for the I&M records of the
PROFINET IO protocol.
• Appendix B – ABB IP configuration tool for FENA shows how
to use the APP IP configuration tool for FENA.
• Appendix C – FENA configuration web pages presents the
FENA configuration web pages.
Modbus/TCP protocol
• Modbus/TCP – Start-up presents the steps to take during the
start-up of the drive with the adapter module and gives
information on configuring the Modbus/TCP client.
• Modbus/TCP – Communication profiles describes the
communication profiles used in the communication between
the client, the adapter module and the drive.
• Modbus/TCP – Communication protocol describes the
Modbus/TCP communication protocol for the adapter module.
• Modbus/TCP – Diagnostics explains how to trace faults with
the status LEDs on the adapter module.

ABB FENA-21 Specifications

General

Brand	ABB
Model	FENA-21
Category	Adapter
Language	English