ABB FENA-21 User Manual

282 PROFINET IO – Start-up
The start sequence for the parameter example above is given
below.
Control word:
• Reset the fieldbus communication fault (if active).
• Enter 47Eh (1150 decimal) –> READY TO SWITCH ON.
• Enter 47Fh (1151 decimal) –> OPERATING (Speed mode).
21.01 Speed ref1 sel
(ACS850)
21.01 Speed ref sel
(ACQ810)
FBA ref1
FBA ref1
Selects the fieldbus reference 1 as
the source for speed reference 1.
1)
Read-only or automatically detected/set
2)
Example
Drive parameter Setting for
ACS850/ACQ810
drives
Description

ABB FENA-21 Specifications

General

Brand	ABB
Model	FENA-21
Category	Adapter
Language	English