104 Networks
Network status panel
• Disable DHCP button disables the DHCP server mode. The button is visible only
when the DHCP mode has been activated with the SD RJ45 button.
• IP address field shows the currently used IP address for the interface. If the field is
empty, no IP address has been defined. If the link status is "down", a message
indicating this is shown instead. This field cannot be modified.
• Netmask field shows the current network mask. If the field is empty, no mask has
been defined. This field cannot be modified.
• Gateway field shows the default gateway for the specific interface. This field cannot
be modified in the Network status panel.
Network services
The Network services view (Settings –> Network services) shows the connectivity of
the NETA-21 with outside world over Ethernet.
For example, time services are located in the Locale settings view. Some of the out-bound
reporting services such as email and FTP are configured in the Report view.
The Services tab contains the following components:
• Save button saves the changes to the NETA-21.
• Reset button discards all changes made by the user and restores the default settings.
• Export button exports the visible settings to a local file.
• Import button imports the settings from a file to the UI.
• Test SMTP settings button asks you for an email address. The UI uses the visible
SMTP settings to send a test email to the specified email address.
To Next Page
Loading...
Need help?
General
