ABB NETA-21 User Manual

124 Reporting
Creating an email report
To be able to use the email reporting, you must configure the SMTP settings. See section
Network services.
Make sure that you have set the logging intervals for the parameters (Reports –> History
logger). If you have not set the logging intervals for the parameters, the reports will have
no data.
1. Go to Reports –> Settings and click the Add button.
2. Select E-mail reporting from the drop-down list.
Now the new report has been added to the list of reports.
3. Define the general settings of the report, such as report name and reporting trigger.
See section Setting the report trigger.
4. When you have named the report and selected the trigger, click the Reported data
sub-panel.
Here you can select the data to be reported. See Setting the reported data.
5. Click the Output settings sub-panel and define the settings.
• Enable report is a check box for enabling the email reporting.
• Report output format is a list for defining the template used in the report.
• From address is a text box for defining the sender.

ABB NETA-21 Specifications

General

Brand	ABB
Model	NETA-21
Category	Measuring Instruments
Language	English