ABB NETA-21 User Manual

Start-up 39
 Setting date and time
Note: You can change the locale settings, if you have the access rights of Drive expert,
Network admin or Tool admin.
1. To set date and time, go to Settings –> Locale –> Date and time.
Note: If the NETA-21 does not have the correct date and time, the stored data will also
be logged with incorrect date and time stamp.
2. In the Time source drop-down list, select one of the following values:
• Automatic
• NTP (Network Time Protocol)
• Manual
If you select Manual, define the time from the Current time drop-down list and
select the date from the calendar in the Current date box.
• External
The external software synchronizes time with NETA-21 periodically. Hence,
enable External option when you use remote monitoring services.
Note: In the Automatic mode the NETA-21 tries to fetch time and date over NTP,
contacting server pool.ntp.org by default.
3. Fill in other appropriate boxes.
 Setting the language
Note: You can change the locale settings, if you have the access rights of Drive expert,
Network admin or Tool admin. Currently only English language is available for the web UI.
To customize the date format, time format, decimal separator and the first day of the week,
go to Settings –> Locale –> Language.

ABB NETA-21 Specifications

General

Brand	ABB
Model	NETA-21
Category	Measuring Instruments
Language	English