ABB PVI-6.0-TL-OUTD User Manual

- 105 -
000039BG
8 - Maintenance
Storage and dismantling
Storage of the equipment or prolonged stop
If the equipment is not used immediately or is stored for long periods,
check that it is correctly packed and contact ABB for storage instructions.
The equipment must be stored in well-ventilated indoor areas that do
not have characteristics that might damage the components of the
equipment.
Restarting after a long or prolonged stop requires a check and, in some
cases, the removal of oxidation and dust that will also have settled inside
the equipment if not suitably protected.
Dismantling, decommissioning and disposal
ABB CANNOT be held responsible for disposal of the equipment: displays, cables, batteries,
accumulators, etc., and therefore the customer must dispose of these substances, which
are potentially harmful to the environment, in accordance with the regulations in force in the
country of installation.
If the equipment is dismantled, in order to dispose of the products that it
is composed of, you must adhere to the regulations in force in the country
of destination and in any case avoid causing any kind of pollution.
Dispose of the various types of materials that the parts of the equipment consist of in dumps
that are suitable for the purpose.
Table: disposal of components
COMPONENT MATERIAL OF CONSTRUCTION
Frame, brackets, supports ............................................................................................... Arc-welded steel FE37
Casing or covers ................................................................................................................................ABS, plastic
Paint and ........................................................................................................................................................ RAL
Gaskets and seals ............................................................................................................ Rubber / Teon / Viton
Electrical cables ......................................................................................................................... Copper / Rubber
Conduits .............................................................................................................................. Polyethylene / Nylon
Back-up battery ................................................................................................................. Nickel / Lead/ Lithium

ABB PVI-6.0-TL-OUTD Specifications

General

Brand	ABB
Model	PVI-6.0-TL-OUTD
Category	Inverter
Language	English