- 82 -
000442BG
7 - Operation
Info Menu
Selecting INFO from the three main sub-menus gives access to:
1. Part No.
Displays the model code.
2. Serial No.
Displays the serial number and week and year of manufacture of the
equipment .
3. Firmware
Displays the rmware version installed in the equipment.
4. Country Select.
Displays information on the grid standard set with the rotary switches.
• Actual value: Displays the grid standard set.
• New value: Allows you to select a new grid standard (by using the
UP and DOWN buttons), which will only become effective when the
equipment has been switched off and on again, or when the selection
has been conrmed in the Set new value submenu described below.
The grid standard can only be changed if the time allowed for doing so
(24 hours of operation) has not expired.
Set new value: This allows you to conrm/set the new grid standard
set in the “New value” section of the previous menu.
• Residual time: Displays the time remaining in which it is still possible to
set a new grid standard. When the time expires, “Locked” will be displayed,
which indicates it is not possible to change the grid standard again.
Information
Product ID
Serial No
Firmware
Country Select.
DOWN
ENTER
UP
1
DOWN UP
DOWN UP
2
3
4
To Next Page
Loading...
Need help?
General