ABB TPU2000 User Manual

TPU2000/2000R Modbus/Modbus Plus/ Modbus TCP/IP Automation Guide
210
Register
Address
Item Description
63712 SPARE_1
63713 Execute Register
0 = No Action
1 = Update Registers
2 = Refresh Registers
Unsigned 16 Bits
63714 Access Password ASCII – 2 Characters Leftmost Digits
63715 Access Password ASCII – 2 Characters Rightmost Digits
63716 SPARE_2
63717 Through Fault Sum KSI Phase A –
Winding 3
Unsigned 16 Bit
0 – 9999
Kiloamps Symmetrical – Current existing
when breaker opened Phase A Winding 3
63718 Through Fault Sum KSI Phase B –
Winding 3
Unsigned 16 Bit
0 – 9999
Kiloamps Symmetrical – Current existing
when breaker opened Phase A Winding 3
63719 Through Fault Sum KSI Phase C –
Winding 3
Unsigned 16 Bit
0 – 9999
Kiloamps Symmetrical – Current existing
when breaker opened Phase A Winding 3
Alarm Settings
Counter and Metering settings may be set and configured via the registers from 61664 through 61682. Setting of
the quantities is relatively straightforward. It should be noted that Positive Watt Alarm 1 and Positive Watt Alarm 2
units are displayed in either KWhr or MWhr according to bit 6 of Configuration Flag in the Configuration Settings
Group. If bit is set to one, use MWhr, if bit is zero, use KWhr.
Table 5-75. Alarm Setting Table
Register
Address
Item Description
61664 SPARE_1
61665 Execute Register
0 = No Action
1 = Update Registers
2 = Refresh Registers
Unsigned 16 Bits
61666 Access Password ASCII – 2 Characters Leftmost Digits
61667 Access Password ASCII – 2 Characters Rightmost Digits
61668 SPARE_2
61669 Through Faults Unsigned Integer 16 Bits
0<=Range <=9999
61670 Through Fault Summation KSI
Alarm
Unsigned Integer 16 Bits
0<=Range <=9999
61671 Through Fault Summation
Cycles
Unsigned Integer 16 Bits
0<=Range <=9999
61672 Overcurrent Trip Alarms Unsigned Integer 16 Bits
0<=Range <=9999
61673 Differential Trip Alarms Unsigned Integer 16 Bits
0<=Range <=9999

ABB TPU2000 Specifications

General

Brand	ABB
Model	TPU2000
Category	Computer Hardware
Language	English