Altos R520 Installation Configuration Guide 90
When IOAT driver installation completed, you could see subdirectories and files
for each subdirectory of /sys/class/dma folder.
RAID Utility Installation
NOTE. Please install the compat-libstdc++-296-2.96-138.i386.rpm and compat-
libstdc++-33-3.2.3-61.i386.rpm packages with the CD #2 of Red Hat Enterprise
Linux 5 prior to install the RAID Web Console 2.
1. You can find the RAID Web Console 2 in EasyBUILD. Please copy the utility
from the EasyBUILD to HDD first.
# mount /media/cdrecorder
# cp –R
/media/cdrecorder/app/r520/raid/Integrated_SAS/Linux/.
/tmp
2. Install RAID Web Console 2 utility
# cd /tmp/
# unzip ir3_Linux_RWC2_v2_19_01.zip
# chmod 755 install.sh
# chmod 755 RunRPM.sh
# ./install.sh
3. Type y to accept the license agreen and select 1 for full installation.
4. To start RAID Web Console 2 on, select applications -> System Tools ->
RAID Web Console 2 Startup UI
Red Hat Enterprise Linux 5.0 Installation (with integrated SAS
SW RAID)
Below information describes how to manually install Red Hat Enterprise Linux
5.0 on Altos R520 with integrated SAS SW RAID.
Drivers Required
For Red Hat Enterprise Linux 5.0 Installation, the following device drivers are
required.
Device Version EasyBUILD Version
Integrated SAS
hardware RAID
09.32.0207.20
08
EasyBUILD 8.0 build 100 (or later)
Onboard Chipset N/A OS built-in
Onboard Gigabit
Ethernet
7.6.5 EasyBUILD 8.0 build 100 (or later)
Onboard VGA N/A OS built-in
Onboard USB 2.0 N/A OS built-in
To Next Page
Loading...
Need help?
General
