Altos R520 Installation Configuration Guide 60
4. After installing the driver, you would see ATI ES1000 listed in Display
adapters.
Microsoft Scalable Networking Pack Installation
You can find the Microsoft Scalable Networking Pack for Windows Server 2003
in the Microsoft website:
http://www.microsoft.com/downloads/details.aspx?FamilyID=c65f4a89-f4da-
463e-a496-4b5abd660bf9&DisplayLang=en
1. Download the SNP from Microsoft website.
2. Double-click on the downloaded file to run the installation program.
3. Follow the instruction to install the SNP and reboot the server after the
SNP is installed.
RAID Utility Installation
1. Please insert the EasyBUILD into the optical drive.
2. Expand Utilities -> Altos R520 -> Onboard SATA RAID, select RAID Web
Console 2 (Windows) and click on Setup.
3. Follow the instruction and use the default setting to complete the RAID
Utility Installation.
Network Utility Installation
1. Please insert the EasyBUILD into the optical drive.
2. Expand Utilities -> Altos R520 -> Intel Gigabit Ethernet Controller/Intel
PRO/1000 Network Adapter, select PROSet Utility (Windows Server 2003)
and click on Setup.
3. Follow the instruction and use the default setting to complete the
Network Utility Installation.
Windows 2000 Advanced Server SP4 Installation (with
integrated SAS hardware RAID)
Below information describes how to manually install Microsoft Windows 2000
Advanced Server SP4 on Altos R520 with integrated SAS hardware RAID.
Drivers Required
For Windows 2000 Installation, the following device drivers are required.
Device Version EasyBUILD Version
Integrated SAS
hardware RAID
1.17.0.32 EasyBUILD 7.1 build 400 (or later)
Onboard Chipset 7.4.0.1005 EasyBUILD 7.1 build 400 (or later)
Onboard Gigabit
Ethernet
9.3.39 EasyBUILD 7.1 build 400 (or later)
To Next Page
Loading...
Need help?
General
