149 Altos R520 Installation Configuration Guide
Gigabit Ethernet Driver Installation
1. You can find the Intel 82546EB driver in EasyBUILD. Please refer to
directory of the 82546EB driver in Driver Required section and copy the
driver from the EasyBUILD to HDD first.
# mount /media/cdrecorder /mnt
# cp –R /mnt/Disk/R520/NIC/Intel/pro1000.lx/. /tmp
2. Change the directory to the driver source and install the driver
# cd /tmp/src/
# make install
# insmod e1000.ko
3. Run the YaST2 utility.
# YaST2
4. Select Network Devices -> Network Card, it will auto detect the Intel
82563EB network controller and help you to configure it.
RAID Utility Installation
1. You can find the RAID Web Console 2 in EasyBUILD. Please copy the utility
from the EasyBUILD to HDD first.
# mount /media/cdrecorder /mnt
# cp –R /mnt/app/R520/raid/Integrated_SAS/Linux/. /tmp
2. Install RAID Web Console 2 utility
# cd /tmp/
# unzip ir3_Linux_RWC2_v1.13-00.zip
# chmod 755 install.sh
# chmod 755 RunRPM.sh
# ./install.sh
3. Type y to accept the license agreen and select 1 for full installation.
4. To start RAID Web Console 2, click on start button, select System -> More
Programs -> RAID Web Console 2 Startup UI
SUSE Linux Enterprise Server 9 Service Pack 3 Installation (with
integrated SAS hardware RAID 2)
Below information describes how to manually install SUSE Linux Enterprise
Server 9 Service Pack 3 on Altos R520 with integrated SAS hardware RAID 2.
To Next Page
Need help?
General
