153 Altos R520 Installation Configuration Guide
4. Follow the instruction to load the integrated SAS SW RAID driver from
the driver diskette.
5. Follow the instruction to change the CD to SUSE Linux Enterprise Server 9
CD #1.
6. At the Installation Settings, select the Software and click on Detailed
selection to add kernel-source and C/C++ Compiler and Tools to install.
7. To add C/C++ compiler tools, please check C/C++ Compiler and Tools in
the left window.
8. To add kernel-source, please select Various Linux Tools in the left window
and check kernel-source in the right window.
9. After you add the kernel-source and C/C++ Compiler and Tools, please
click on Accept and follow the instruction to complete the installation.
Gigabit Ethernet Driver Installation
1. You can find the Intel 82546EB driver in EasyBUILD. Please refer to
directory of the 82546EB driver in Driver Required section and copy the
driver from the EasyBUILD to HDD first.
# mount /media/cdrecorder /mnt
# cp –R /mnt/Disk/R520/NIC/Intel/pro1000.lx/. /tmp
2. Change the directory to the driver source and install the driver
# cd /tmp/src/
# make install
# insmod e1000.ko
3. Run the YaST2 utility.
# YaST2
4. Select Network Devices -> Network Card, it will auto detect the Intel
82563EB network controller and help you to configure it.
RAID Utility Installation
1. You can find the RAID Web Console 2 in EasyBUILD. Please copy the utility
from the EasyBUILD to HDD first.
# mount /media/cdrecorder /mnt
# cp –R /mnt/app/R520/raid/Integrated_SAS/Linux/. /tmp
2. Install RAID Web Console 2 utility
# cd /tmp/
# unzip ir3_Linux_RWC2_v1.13-00.zip
# chmod 755 install.sh
To Next Page
Loading...
Need help?
General
