159 Altos R520 Installation Configuration Guide
IDEATA.HAM Standard ATA/IDE RAID Adapter
7. Then, press INSERT key to insert the integrated SAS hardware RAID 2
driver. After the drivers are successfully loaded, please select Return to
driver summary.
8. Continue the installation.
9. When you see the following message, please select Modify. Then, move
the cursor to Network boards and press Enter.
The following device drivers were detected for this
server. Add, change, or delete device drivers as
needed.
Device types Driver names
------------------------- --------------
Network boards:
NetWare Loadable Modules: (optional)
10. Please press INSERT key to insert the onboard Intel 82563EB Gigabit
Ethernet driver. After the drivers are successfully loaded, please select
Return to driver summary.
11. Then, you would see the following message. Please select Continue.
The following device drivers were detected for this
server. Add, change, or delete device drivers as
needed.
Device types Driver names
------------------------- --------------
Network boards: E1000E, E1000E
Network Loadable Modules: (optional)
12. Please follow the normal procedures to complete the NetWare 6.5
installation.
VMware ESX Server 3.5 (with integrated SAS hardware RAID)
Below information describes how to manually install VMware ESX Server 3.5 on
Altos R520 with integrated SAS hardware RAID.
Drivers Required
Please use VMware ESX Server 3.5 built-in drivers for the installation on Altos
R520.
Device Version EasyBUILD Version
Onboard VGA N/A OS Built-in
Onboard Chipset N/A OS Built-in
To Next Page
Loading...
Need help?
General
