93 Altos R520 Installation Configuration Guide
# cp –R
/media/cdrecorder/app/r520/raid/Integrated_SAS/Linux/.
/tmp
2. Install RAID Web Console 2 utility
# cd /tmp/
# unzip ir3_Linux_RWC2_v2_19_01.zip
# chmod 755 install.sh
# chmod 755 RunRPM.sh
# ./install.sh
3. Type y to accept the license agreen and select 1 for full installation.
4. To start RAID Web Console 2 on, select applications -> System Tools ->
RAID Web Console 2 Startup UI
Red Hat Enterprise Linux 5.0 Installation (with Onboard SATA
RAID)
Below information describes how to manually install Red Hat Enterprise Linux
5.0 on Altos R520 with onboard SATA RAID.
Drivers Required
For Red Hat Enterprise Linux 5.0 Installation, the following device drivers are
required.
Device Version EasyBUILD Version
Integrated SAS
hardware RAID
09.32.0207.20
08
EasyBUILD 8.0 build 100 (or later)
Onboard Chipset N/A OS built-in
Onboard Gigabit
Ethernet
7.6.5 EasyBUILD 8.0 build 100 (or later)
Onboard VGA N/A OS built-in
Onboard USB 2.0 N/A OS built-in
IOAT 2.15 EasyBUILD 8.0 build 200 (or later)
Software Required
The management utility of Onboard SATA RAID can be found in the EasyBUILD.
Software Version EasyBUILD Version
RAID Web Console
2
2.19-01 EasyBUILD 8.0 build 100 (or later)
Configuring integrated SAS hardware RAID
Please refer to the Appendix C. for the onboard SATA RAID configuration.
To Next Page
Loading...
Need help?
General
