Altos R520 Installation Configuration Guide 30
VGA Driver Installation
1. Windows will treat onboard VGA as Standard VGA device. You can find
the ATI ES1000 driver in EasyBUILD. Please insert the EasyBUILD into the
optical drive.
2. Expand Drivers -> Altos R520 -> Graphics adapters -> ATI ES1000, select
Windows Server 2008 x64 and click on Setup.
3. Follow the instruction to install the VGA driver and reboot the server
after the driver is installed.
RAID Utility Installation
1. Please insert the EasyBUILD into the optical drive.
2. Expand Utilities -> Altos R520 -> Onboard SATA RAID, select RAID Web
Console 2 (Windows) and click on Setup.
3. Follow the instruction and use the default setting to complete the RAID
Utility Installation.
Network Utility Installation
The PROSet utility for the onboard Gigabit Ethernet controller will be installed
automatically when you installing the onboard Gigabit Ethernet driver.
Windows Server 2003 Enterprise x64 Edition Installation (with
integrated SAS hardware RAID)
Below information describes how to manually install Windows Server 2003
Enterprise x64 Edition on Altos R520.
Drivers Required
For Windows Server 2003 x64 Installation, the following device drivers are
required.
Device Version EasyBUILD Version
Integrated SAS
hardware RAID
1.17.0.64 EasyBUILD 7.1 build 400 (or later)
Onboard Chipset 7.4.0.1005 EasyBUILD 7.1 build 400 (or later)
Onboard Gigabit
Ethernet
9.3.39 EasyBUILD 7.1 build 400 (or later)
Onboard VGA 8.24.3.0 EasyBUILD 7.1 build 400 (or later)
Onboard USB 2.0 N/A OS built-in
IOAT 1.2.52.0 EasyBUILD 7.1 build 400 (or later)
Hot-swap
backplane
5.0.6055.2 EasyBUILD 7.1 build 400 (or later)
Software Required
The management utility of integrated SAS hardware RAID and NIC can be
To Next Page
Loading...
Need help?
General
