310
Chapter 5 Error Messages
Arbitrary Waveform Errors
5
786 Not able to delete a built-in arb waveform
You cannot delete any of the five built-in waveforms: “EXP_RISE”,
“EXP_FALL”, “NEG_RAMP”, “SINC”, and “CARDIAC”.
787 Not able to delete the currently selected active arb waveform
You cannot delete the arbitrary waveform that is currently being output
(
FUNC:USER
command)
.
788 Cannot copy to VOLATILE arb waveform
The DATA:COPY command copies the waveform from volatile memory to
the specified name in non-volatile memory. The source for the copy is
always “VOLATILE”. You cannot
copy
from
any other source and you
cannot copy
to
“VOLATILE”.
800 Block length must be even
The function generator represents binary data as 16-bit integers,
which are sent as two bytes (DATA:DAC VOLATILE command).
810 State has not been stored
The storage location that you specified in the *RCL command was not
used in a previous *SAV command. You cannot recall the instrument
state from a storage location that is empty.
To Next Page
Need help?
General
