Rockwell Automation Publication 1756-UM001M-EN-P - February 2012 173
Develop Applications Chapter 10
4. Use either Run Continuous Task (default) or Reserve for System Tasks.
– The Run Continue Task radio button is used when there is no
communication or background tasks to process; controller immediately
returns to the continuous task.
– The Reserve for System Task radio button allocates the entire 1 ms of
the system overhead time slice whether the controller has
communication or background tasks to perform before returning back
to the continuous task. This lets you simulate a communication load on
the controller during design and programming before HMIs, controller
to controller messaging, and so forth, are set up.
5. Click OK.
Sample Controller Projects
RSLogix 5000 Enterprise software includes sample projects that you can copy
and modify to fit your application. To access the sample projects, either choose
Open Sample Project in the RSLogix 5000 Quick Start menu or use the menu
commands (File > Open > Projects > Samples).
Figure 38 - Opening Sample Projects in RSLogix 5000 Software
To Next Page
Loading...
Need help?
General
