Allied Telesis AT-8000S Series User Manual

Page 116
Allied Telesis AT-8000S Switch
Web Browser Interface User’s Guide
Defining SNMP Groups
The provides information for creating SNMP groups, and assigning SNMP access control privileges to SNMP
groups. Groups allow network managers to assign access rights to specific device features, or feature aspects.
To define an SNMP group:
1. Click SNMP > Groups. The SNMP Group Page opens:
Figure 72: SNMP Group Page
The SNMP Group Page contains the following fields:
• Group Name — Displays the user-defined group to which access control rules are applied. The field range is
up to 30 characters.
• Security Model — Defines the SNMP version attached to the group. The possible field values are:
– SNMPv1 — SNMPv1 is defined for the group.
– SNMPv2c — SNMPv2c is defined for the group.
– SNMPv3 — SNMPv3 is defined for the group.
• Security Level — Defines the security level attached to the group. Security levels apply to SNMPv3 only.
The possible field values are:
– No Authentication — Indicates that neither the Authentication nor the Privacy security levels are
assigned to the group.
– Authentication — Authenticates SNMP messages, and ensures that the SNMP message’s origin is
authenticated.
– Privacy — Encrypts SNMP messages.
• Operation — Defines the group access rights. The possible field values are:

Allied Telesis AT-8000S Series Specifications

General

Brand	Allied Telesis
Model	AT-8000S Series
Category	Network Router
Language	English