Configuring Interfaces
Configuring VLANs
Page 79
Defining GVRP
This section explains how to configure GVRP on the device. GARP VLAN Registration Protocol (GVRP) is
specifically provided for automatic distribution of VLAN membership information among VLAN-aware bridges.
GVRP allows VLAN-aware bridges to automatically learn VLANs to bridge ports mapping, without having to
individually configure each bridge and register VLAN membership. This section describes the following topics:
• Configuring GVRP
• Enabling/Disabling GVRP on a Port
Notes
• GVRP cannot be configured if MSTP is enabled on the device.
• The Default button returns all GVRP parameter settings to their default values.
Caution
The settings for the three GVRP timers must be the same on all GVRP-active devices in your network.
Configuring GVRP
To define GVRP on the device:
1. Click Layer 2 > GVRP. The GVRP Page opens:
Figure 48: GVRP Page
The GVRP Page contains the following fields:
• GVRP Global Status — Indicates if GVRP is enabled on the device. The possible field values are:
To Next Page
Loading...
Need help?
General
