•
Insert the flywheel on the crankshaft.
•
Screw the screw together with the
washer but without tightening.
•
Place the appropriate tool for locking
the flywheel.
•
Locking the flywheel in position, using
the specific tool, tighten the screw on
the crankshaft.
•
Remove the special tool.
Specific tooling
020713Y Flywheel extractor
Locking torques (N*m)
Screw fixing Rotor - Crankshaft - M12x1.25 (1)
130 Nm (95.88 lbf ft)
•
Place the retention plate.
•
Tighten the screw.
DORSODURO 1200 ABS - ATC Engine
ENG - 225