By moving the selector to the right - pressing it
briefly - the ABS system turns on and the warning
light starts blinking.
By moving the selector to the left - pressing it brief-
ly - the ABS system turns off and the warning light
remains on with a steady light.
Once the ABS system is enabled or disabled, the
digital display automatically returns to the ABS
function.
When the bike is in motion, the instrument panel
automatically exits the ABS function.
NOTE
AT KEY ON, IF THE SYSTEM IS FUNCTIONING CORRECT-
LY, THE ABS INDICATOR LIGHT WILL FLASH, AND ONCE
A VEHICLE SPEED OF 5 Km/h - 3.1 mph IS EXCEEDED,
THE SYSTEM WILL BE ACTIVE.
NOTE
WHEN THE BIKE'S PANEL IS OFF AND WHEN TURNING IT
ON THE NEXT TIME THE ABS SYSTEM IS STILL ACTIVE,
REGARDLESS OF WHAT WAS SET PREVIOUSLY.
Riding with a deactivated ABS system
The warning light (5) turns on permanently, the system was deactivated.
Riding with a deactivated ABS system
The warning light (5) turns on permanently, the system was deactivated.
20 A fuse (ABS Main fuse) (6)
Protects: ABS Control unit.
Guide to diagnosis
Each time the key is ON, if at least one current or stored* error of the ABS system is not detected:
•
the EFI warning light flashes and the word ABS is shown on the display (NA 850 Mana ABS).
Braking system DORSODURO 1200 ABS - ATC
BRAK SYS - 350
To Next Page
Loading...
Need help?
General
